A plant project ends in documents: GA drawings, isometrics, MTOs and many lists. When drawings are made separately from the model, every design change means redrawing, and a drawing can fall behind the model.
Deliverables as an output of data
In Brilian 3D, GA drawings, isometrics, MTOs and reports are built from the model's data. When the model changes, the deliverables are simply generated again. Revisions are compared automatically, and revision clouds are placed where something changed.
Isometrics for fabrication
Isometrics are generated per line and carry what the fabrication shop needs:
- Bill of materials, spools and cut lists
- Weld numbers and fitting-to-fitting dimensions
- HOLD marks for parts that aren't final
- Export to PCF for fabrication, and to DXF
Checked before issue
Isometrics go through self check, design check and back check, with checklists from the company library. An isometric can't be issued while clashes or check findings are still open, so known problems don't get issued with it.
MTOs that follow the spec
Pipe MTOs account for waste and round up to stock lengths. End types and joint rules in the spec decide which flanges, gaskets and bolts go into the MTO. Besides pipe, there are MTOs for steel, cable tray and ducting.
Standard reports such as nozzle lists, control valve lists and line summaries can be printed to PDF or exported to Excel.
Starting from company templates
One company title block serves every sheet type, and sheet templates can be imported from DXF. Deliverables from the model look the same as the company's existing documents.